An archive of grimeforum.com, 2007–2022. Read-only.
Archive › The Studio

tips for mastering bass and genral tecniques in a mix

18th August '10, 02:02 PM#1
vibezinPosts: 229Since: 2009
useing fruity loops,safe
18th August '10, 04:38 PM#2
vibezinPosts: 229Since: 2009
Great help :L
18th August '10, 04:54 PM#3
mistayifType To Me Properly Type To Me Like I'm One Of Dem GuysJoined: April 2010Reppin: West LDNPosts: 1,090▮▮▮▮
turn your speakers up and your sounds down.

have your drums peak at around -9db and your bass around 1db or 2db lower. then mix everything else around that accordingly. by the time u've finished mixing the whole track, it'll sounds just as good as it was before but you'll have around 6db of headroom so things will sound much clearer and there will be 0 clipping. you can put a limiter on the master to boost volume up and if u want to get it mastered, just take the limiter off and send the wav straight to the mastering engineer. he'll love u for this as he'll have an ideal 6db of room to work with as opposed to 0.5db or in some cases, a track which clips all over the place and he has to give it a new mixdown before he can put it through the mastering process

this is the best advice for mixing down i have EVER had. make sure your drums and bass together peak at around -8/-7 db and mix all your other elements around this level

http://soundcloud.com/mistayif/mathematics

follow me on twitter @mistayif
like my facebook page mistayif
18th August '10, 04:57 PM#4
mossmade beatzPosts: 1,173Since: 2009
mistayif said:
turn your speakers up and your sounds down.

have your drums peak at around -9db and your bass around 1db or 2db lower. then mix everything else around that accordingly. by the time u've finished mixing the whole track, it'll sounds just as good as it was before but you'll have around 6db of headroom so things will sound much clearer and there will be 0 clipping. you can put a limiter on the master to boost volume up and if u want to get it mastered, just take the limiter off and send the wav straight to the mastering engineer. he'll love u for this as he'll have an ideal 6db of room to work with as opposed to 0.5db or in some cases, a track which clips all over the place and he has to give it a new mixdown before he can put it through the mastering process

this is the best advice for mixing down i have EVER had. make sure your drums and bass together peak at around -8/-7 db and mix all your other elements around this level
.
18th August '10, 04:58 PM#5
vibezinPosts: 229Since: 2009
bump!
24th August '10, 01:16 PM#6
vibezinPosts: 229Since: 2009
yo one thing g about this whats the db in hertz ?
18th November '10, 08:13 PM#7
LdizzyPosts: 13Since: 2010
hz and dbs are totally different things....

db is just a rate. They always compare a certain value to a reference value but they don't mean anything like ''that precise amount of db means a loud sound '' and ''that amount of db means a quiet sound''.... In the audio digital workstation domain, ur value reference is usually the point where ur daw can't process the info further more and starts to peak. That is the 0db. If u use a daw... any daw... and ur audio goes over 0db.. (meaning its shown in red in the pumper)... it means there is digital clipping and ur waves are being trunkated... the top of ur sounds, the transient (often) will loose definition and be cut straight and ur waves will slowly start to sound more and more like a square wave... up to the point where they sound like shitty squarewaves... that is called SATURATION. Some people use it as an aesthetical tool... i have a friend who peaks everything on his fl channel strips and it comes out as shitty lo fi agressive sound, however, he'll bounce the whole thing and keep some elements reasonably non peaked... U need to know tho that DIGITAL SATURATION has NOTHING to do with Analog saturation. Analog saturation is more gradual so it introduces fun artifacts in sounds often described as ''Warm'' and ''pleasant''.. while digital saturaiton is mainly a pain in the clappah.

so what ur lads are tellin ya here is to keep the global sound of ur drums.. at -7 db... so u still have a lot of room to stack sounds before u reach 0db and start saturating (which, u will have understood by now, has nothing to do with silence)... its gonna sound better and the sound quality will not be altered. + it allows u to change sounds after, like if u want to boost the low frequencies... u will have a little ''headroom'' a littlle ''space to do it before u hit 0db and start loosing some beauty''.

hz, however, represent frequencies... they basically tell u how many times per second an event occurs... They measure : eg notes / harmonics / spectral quality of sounds... the stuff u play with on an eq... they DO have to do with volume... but from what i can see ur not there yet... make sure u understand the basics first...
18th November '10, 08:20 PM#8
vibezinPosts: 229Since: 2009
Ldizzy said:
hz and dbs are totally different things....

db is just a rate. They always compare a certain value to a reference value but they don't mean anything like ''that precise amount of db means a loud sound '' and ''that amount of db means a quiet sound''.... In the audio digital workstation domain, ur value reference is usually the point where ur daw can't process the info further more and starts to peak. That is the 0db. If u use a daw... any daw... and ur audio goes over 0db.. (meaning its shown in red in the pumper)... it means there is digital clipping and ur waves are being trunkated... the top of ur sounds, the transient (often) will loose definition and be cut straight and ur waves will slowly start to sound more and more like a square wave... up to the point where they sound like shitty squarewaves... that is called SATURATION. Some people use it as an aesthetical tool... i have a friend who peaks everything on his fl channel strips and it comes out as shitty lo fi agressive sound, however, he'll bounce the whole thing and keep some elements reasonably non peaked... U need to know tho that DIGITAL SATURATION has NOTHING to do with Analog saturation. Analog saturation is more gradual so it introduces fun artifacts in sounds often described as ''Warm'' and ''pleasant''.. while digital saturaiton is mainly a pain in the clappah.

so what ur lads are tellin ya here is to keep the global sound of ur drums.. at -7 db... so u still have a lot of room to stack sounds before u reach 0db and start saturating (which, u will have understood by now, has nothing to do with silence)... its gonna sound better and the sound quality will not be altered. + it allows u to change sounds after, like if u want to boost the low frequencies... u will have a little ''headroom'' a littlle ''space to do it before u hit 0db and start loosing some beauty''.

hz, however, represent frequencies... they basically tell u how many times per second an event occurs... They measure : eg notes / harmonics / spectral quality of sounds... the stuff u play with on an eq... they DO have to do with volume... but from what i can see ur not there yet... make sure u understand the basics first...
Repped.

Nice one mate ive learnt how to master bass much better now, i just need some monitors then ill be away..
18th November '10, 11:44 PM#9
IsaacGrime KidJoined: November 2008Posts: 12▮
Ldizzy said:
hz and dbs are totally different things....

db is just a rate. They always compare a certain value to a reference value but they don't mean anything like ''that precise amount of db means a loud sound '' and ''that amount of db means a quiet sound''.... In the audio digital workstation domain, ur value reference is usually the point where ur daw can't process the info further more and starts to peak. That is the 0db. If u use a daw... any daw... and ur audio goes over 0db.. (meaning its shown in red in the pumper)... it means there is digital clipping and ur waves are being trunkated... the top of ur sounds, the transient (often) will loose definition and be cut straight and ur waves will slowly start to sound more and more like a square wave... up to the point where they sound like shitty squarewaves... that is called SATURATION. Some people use it as an aesthetical tool... i have a friend who peaks everything on his fl channel strips and it comes out as shitty lo fi agressive sound, however, he'll bounce the whole thing and keep some elements reasonably non peaked... U need to know tho that DIGITAL SATURATION has NOTHING to do with Analog saturation. Analog saturation is more gradual so it introduces fun artifacts in sounds often described as ''Warm'' and ''pleasant''.. while digital saturaiton is mainly a pain in the clappah.

so what ur lads are tellin ya here is to keep the global sound of ur drums.. at -7 db... so u still have a lot of room to stack sounds before u reach 0db and start saturating (which, u will have understood by now, has nothing to do with silence)... its gonna sound better and the sound quality will not be altered. + it allows u to change sounds after, like if u want to boost the low frequencies... u will have a little ''headroom'' a littlle ''space to do it before u hit 0db and start loosing some beauty''.

hz, however, represent frequencies... they basically tell u how many times per second an event occurs... They measure : eg notes / harmonics / spectral quality of sounds... the stuff u play with on an eq... they DO have to do with volume... but from what i can see ur not there yet... make sure u understand the basics first...
I like you.

From experience, experimentation, here are a few pointers I want to add onto this post:

Instruments that share similar frequencies, can cause issues like phasing and such, and they can also double up and cause a gain increase, the best solution, is too group them into AUX channels or Group channels (depending on what DAW you're using), and then using a compressor too keep the levels from exceeding the desired level, or you could consider doing some serious EQing and removing the frequencies that become a problem, not really a great way since you don't want too ruin all the work you put into your composition in order to make it sound like it does.

Also, it's a bloody good idea too use HPF and LPF on audio sources that have frequencies that aren't audible, they're just noise, and add gain, cut them out, will make your mix a lot more clearer.

Another tip that I think is a bloody good one, try to make sure that you're bloody low frequencies aren't overpowering the mix! Aslong as the low frequencies are audible and are clearly there, a big system will produce them very nicely! Remember, because low frequencies are slower and longer than higher frequencies, a sinewave at 40hz will just cause gain increase all over the joint, so try and keep it reasonable, and not overpowering! This will alow for you too increase the perceived loudness at the mastering stage better if the lower frequencies aren't too overpowering!

x
19th November '10, 08:24 AM#10
RetrofreakSuper ModRadio is dead... Music lives on in the minds of the free!!Posts: 13,831▮▮▮▮▮▮▮▮▮▮
Vocals: Roll off bellow 100 - 120Hz, dip around 400Hz and control 2k..this wil help them sit in the mix as vocals can eat up allot of space and effect the bottom end.

Go through your vocal and draw down breaths, by about 4db as compression will only make them louder and sum have subs in them.

Look out for "P's and "pop's" in the vocal and apply a bass roll off on the attack of these words in order to minimise the sub hence giving you more room for the bass.




Bass.

For phatness, use good sounds in the first place preferably analog as they have better harmonics that can be manipulated easily.

Failing the above try applying an analog Super Chorus or Flanger guitar pedal to your signal as this will detune your bass and make it sound thicker.

Compress one part of the sub to hold it and add mild distortion for harmonics so the notes can be heard.



Kick and bass fight:

As they operate in the sam realm always make sure that there contrast between the two e.g.

Big Sub bass + Punchy Kick with a little Sub.

Big Sub Kick (808) + High bass with audible notes and controlled sub played low in the mix in order not to clash with the 808.

The Key of a track has allot to do with the type of sub you can get out of the said notes, also:

Analog>>>>>>>>>>>>>>>>Digital
The Victorious Warrior First Wins Then Seeks Battle
The Defeated Warrior First Battles Then Seeks Victory
- Sun Tzu

See the saved original on the Wayback Machine