An archive of grimeforum.com, 2007–2022. Read-only.
Archive › The Studio

Question

26th October '09, 04:53 PM#1
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
How to make a vocal louder so it goes with the beat without getting distortion?
26th October '09, 04:54 PM#2
Trueform.The Grime Forum QueenJoined: December 2008Reppin: NottinghamPosts: 3,209▮▮
Lower the music volume and keep the vocal the same, then up the whole volume?
26th October '09, 05:14 PM#3
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
Yeah that can work but...

Lets say the instrumental is loud/bass etc sounds nice

But my vocal is nice i try louder it with the same volume as the beat and it starts doing distortion...

So is that the only way making the instrumental lower to the vocal?
26th October '09, 06:37 PM#4
'nuum generalGrime Forum OGJoined: January 2006Reppin: HullPosts: 17,188▮
EQ out unecesary frequencies & use compression to even out the vocal before pushing the gain up.

I'd also agree with the above post. Often turning things down serves a better purpose than turning things up
The Myth
26th October '09, 07:18 PM#5
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
ok thanks
26th October '09, 07:43 PM#6
THOR!Your Posts Sound Out Of Date And Expired I Check My CP, Got Bare AdmiresPosts: 4,942▮▮▮▮▮▮▮▮▮▮
Rocafella said:
How to make a vocal louder so it goes with the beat without getting distortion?
I suggest you begin mixing the vocals with the beat turned off or very low and only turn it on for reference. Compression naturally makes vocals louder but too much compression will crush the sound into nothing, so use it with care.

Start with EQing the vocal to get the right sound you want, add reverb if necessary, then compress it a bit. Once your vocal is sounding nice, turn your speakers down very low so you can just about hear the beat, then bring the vocal gain up or down so you can still hear it - this will ensure the right levels.

Turn the speakers back up for final tweaks.

If the vocal still distorts after running some plug-ins and EQing over it then turn down the beat to fit the vocal, export as wav to finalise, open into a new project and turn up in the master.

Check your recording quality though, vocals shouldn't be too low when recording, and they shouldn't distort when tweaked.
Fear my banhammer!
26th October '09, 08:13 PM#7
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
THOR! said:
I suggest you begin mixing the vocals with the beat turned off or very low and only turn it on for reference. Compression naturally makes vocals louder but too much compression will crush the sound into nothing, so use it with care.

Start with EQing the vocal to get the right sound you want, add reverb if necessary, then compress it a bit. Once your vocal is sounding nice, turn your speakers down very low so you can just about hear the beat, then bring the vocal gain up or down so you can still hear it - this will ensure the right levels.

Turn the speakers back up for final tweaks.

If the vocal still distorts after running some plug-ins and EQing over it then turn down the beat to fit the vocal, export as wav to finalise, open into a new project and turn up in the master.

Check your recording quality though, vocals shouldn't be too low when recording, and they shouldn't distort when tweaked.
Thanks
27th October '09, 01:18 PM#8
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
Can someone give me a good video/link to learn about EQ

Because i dont get when it says dip it 2k mids and etc...
27th October '09, 01:50 PM#9
'nuum generalGrime Forum OGJoined: January 2006Reppin: HullPosts: 17,188▮
Rocafella said:
Can someone give me a good video/link to learn about EQ

Because i dont get when it says dip it 2k mids and etc...
don't really need a video. Look at the below eq (fruity parametric eq 2 in this case). To dip it at 2k simply move one of the bands to 2000hz, then lower it. You can alter the band width using the "BW" control. Fruity will say in the top left corner what the db level of the cut/boost is.

http://www.digitalmusicdoctor.com/reviews/compare/images/full/FL_Studio_Fruity_Parametric_EQ_2_edit.jpg
The Myth
27th October '09, 01:58 PM#10
THOR!Your Posts Sound Out Of Date And Expired I Check My CP, Got Bare AdmiresPosts: 4,942▮▮▮▮▮▮▮▮▮▮
Rocafella said:
Can someone give me a good video/link to learn about EQ

Because i dont get when it says dip it 2k mids and etc...
Don't follow tutorials by the book because it will not apply to your audio.

It's pretty simple, It's split into 3 fields.

The left field = Low frequencies
The Middle Field = Mid frequencies
The right field = High frequencies

EQing then boosts or removes the frequency depending on where you apply your points. Some EQ's often come with an analyser so you can see where the frequencies are.

Say you have a kick drum that has a very harsh mid-snap and slightly low bass, you would bring the mid's (middle field) down to remove the snap, and push the low (left field) up to lower the tone and beef it up. It will take a little trial and error to find the exact sound if you don't have an analyser, or you might need to narrow your freq parameter to identify the precise sound you want to affect.

Just play around with it, it's not hard to figure out.
Fear my banhammer!
27th October '09, 02:04 PM#11
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
Thanks but lets say ive got a vocal its sound ok but needs some EQ

How many bands should i use 2-4? to bring it out more/stronger/brighter
27th October '09, 02:23 PM#12
Miyagi Dan\r\n -<( )>-\r\niDonateJoined: January 2008Posts: 3,449▮▮▮▮▮▮▮▮▮▮
no send to o.p but i see alot of threads like this

you can watch all the youtube tutorials, google searches and ask for as much help as you want but really alot of this stuff is trial and error.

im afraid theres no quick easy answer, you just have to muck about with things, eventually you will learn the features of your software/vsts then you will understand how to use them.
27th October '09, 02:48 PM#13
THOR!Your Posts Sound Out Of Date And Expired I Check My CP, Got Bare AdmiresPosts: 4,942▮▮▮▮▮▮▮▮▮▮
Rocafella said:
Thanks but lets say ive got a vocal its sound ok but needs some EQ

How many bands should i use 2-4? to bring it out more/stronger/brighter
You need to train your ears to tell what the vocal needs then act appropriately.

Making music isn't like assembling an IKEA flat pack, there's no set instruction.
Fear my banhammer!
27th October '09, 02:52 PM#14
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
ok i just practise using it thanks for the help
27th October '09, 03:00 PM#15
THOR!Your Posts Sound Out Of Date And Expired I Check My CP, Got Bare AdmiresPosts: 4,942▮▮▮▮▮▮▮▮▮▮
Rocafella said:
ok i just practise using it thanks for the help
Yeah, experiment, drag bits up and down until you like what you hear if you have to lol
Fear my banhammer!
27th October '09, 03:09 PM#16
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
yeah lol xD
28th October '09, 05:10 PM#17
28th October '09, 06:02 PM#18
The EnigmaGrime Forum OGJoined: August 2006Reppin: iDonate & Im Admin.Posts: 14,009▮▮▮▮▮▮▮▮▮▮
No power of genius has ever yet had the smallest success in explaining existence. The perfect enigma remains...
30th October '09, 04:29 AM#19
316Grime Forum OGJoined: October 2009Reppin: over therePosts: 20,627▮▮▮▮▮▮▮▮▮▮
die

lol
30th October '09, 11:53 AM#20
RetrofreakSuper ModRadio is dead... Music lives on in the minds of the free!!Posts: 13,831▮▮▮▮▮▮▮▮▮▮
A good recording, space separation in a mix and a clever use of compression/limiting is key.
The Victorious Warrior First Wins Then Seeks Battle
The Defeated Warrior First Battles Then Seeks Victory
- Sun Tzu
16th November '09, 06:44 PM#21
JunkyardPosts: 9Since: 2009
to place a vocal in a mix you need a good vocal efx chain, Start with eq (lower the bass and add a little treble) then compress (ratio 1:4, threshold -22db- add the make up gain till it just sits higher in the mix) Add reverb (the more you add, the more it distances itself from the track, add delay (not much, but try a quarter note delay). try to record the vocal clean with plenty of level before distorting. Dont normalise.
16th November '09, 06:59 PM#22
RocafellaThreads Get MangledJoined: June 2009Posts: 151▮
Can this work also i make vocals and beat volume medium den save it

den export it than make it louder? or will it bring distortion
16th November '09, 07:14 PM#23
JunkyardPosts: 9Since: 2009
if you have a track that has already been mixed at 0db (in the red, or it lookes like the wave is a block with no peaks and troughs) you cant just change the gain of the 2 track and them master. it has to be mixed with between -6 and - 3 db. however, if you briing the backing track into your sequencer and drop the fader to -6db. then line your vocal on top of it to -3, you can master this with no distortion. I know this doesnt sound like it makes sense, but look at the faders and the numbers on them.
22nd November '09, 01:28 PM#24
0777Posts: 12Since: 2009
THOR! said:
I suggest you begin mixing the vocals with the beat turned off or very low and only turn it on for reference. Compression naturally makes vocals louder but too much compression will crush the sound into nothing, so use it with care.

Start with EQing the vocal to get the right sound you want, add reverb if necessary, then compress it a bit. Once your vocal is sounding nice, turn your speakers down very low so you can just about hear the beat, then bring the vocal gain up or down so you can still hear it - this will ensure the right levels.

Turn the speakers back up for final tweaks.

If the vocal still distorts after running some plug-ins and EQing over it then turn down the beat to fit the vocal, export as wav to finalise, open into a new project and turn up in the master.

Check your recording quality though, vocals shouldn't be too low when recording, and they shouldn't distort when tweaked.
cool

See the saved original on the Wayback Machine